“Ultimate Explorer” – full campervan electrical kit with 3kVA inverter/charger, hookup, 450W solar, B2B & batteries
The Ultimate Explorer is one of our full campervan electrical kits, including:
- 3000VA Victron inverter/charger
- 3x 150W solar panels & MPPT charge controller
- 2x 30A battery to battery charger
- 12V fuse board & BatteryProtect
- Lynx Distributor
Plus, pick from the following options:
- Leisure batteries (include 2x 230Ah Fogstar Drift PRO lithium batteries, or exclude and choose a different option from our range of batteries)
- Battery monitor (choose between the Victron SmartShunt or BMV). Note – Fogstar Drift PRO batteries have their own battery monitor, so if you choose to use one of these, select “none” in the battery monitor drop-down
- Cerbo GX system monitor & 5″ touch screen (optional)
Busbars, switches, cable, lugs, and everything else required to fully install this electrical system in your campervan are included in this kit.
Ultimate Explorer – full campervan electrical kit
Our full campervan electrical kits include everything you need to fully wire in a campervan electrical system. We include all cabling, fuses, cable lugs, etc., as well as a number of options to enhance the system.
This kit includes a 3000VA Victron inverter/charger, supplied with a consumer unit and 3 core cable. We also include an MK3 interface cable so you can properly configure the settings for your MultiPlus.
We supply 3x 150W solar panels with L mounting brackets. These are typically screwed into place, but can also be glued to both the panel and the roof of your vehicle if you don’t wish to drill through the roof of your vehicle. Note that the open circuit voltage (Voc) of these panels will triple when they’re wired in series, as instructed in the attached wiring diagram.
A 100/30 Victron MPPT charge controller is also included. If you choose to include smart functionality, we will supply the SmartSolar version which can be configured and monitored via the Victron Connect app on your phone. Otherwise, we will include the BlueSolar version.
The 2x 30A non-isolated battery to battery chargers lets you recharge your leisure batteries as you drive (we supply two of these with this system). Please note – the non-isolated model requires a common chassis ground (most standard vehicles will have this).
For your 12V distribution and loads, we include a 12V fuse board. We also include a 65A Smart BatteryProtect in this full system kit. So, this protects your leisure battery when a low state of charge is reached by cutting off any 12V loads.
Choose to include 2x 230Ah Fogstar Drift PRO lithium batteries, or opt for the ‘no battery’ option and pick an alternative from our range of leisure batteries. We include Fogstar batteries in all of our lithium battery systems, as these are the most cost effective lithium battery on the market. We believe they offer the best balance between cost and performance.
Distribute power from your leisure batteries to the rest of your system using a Lynx Distributor. We’ll also include an isolator switch so you can isolate power to the rest of the system. We also include a grounding busbar so all components can be grounded to this, and you can make a single grounding connection to the chassis.
Choose whether you want to include the Cerbo GX and 5″ touch screen. If included, this allows you to monitor your entire system from a single point, via your phone or laptop. We have water tank senders and RuuviTags available if you also want to monitor water tank level and temperature. Read our Cerbo GX article for more information.
This kit includes every single product you need to fully install your campervan electrical system. So as well as the major components, every cable, fuse, holder, switch and lug is included.
Wiring diagram & installation guidance
We supply all our kits with a subsystem wiring diagram and installation guidance. This includes information on setting up the inverter correctly using the DIP switches and the VictronConnect app (if you choose a Smart Dongle). So, you can install your system easily and be confident it’s installed correctly. If you need any support during the install, contact us and we can provide additional support.
Ultimate Explorer – use case
This kit is suitable for someone who will spend their time mostly off-grid. It also includes a shore hook up, so you’ll be able to recharge from a campsite.
The 460Ah leisure battery bank and 450W solar array is suitable for someone with medium to high power usage. For example, common appliances might include a 12V fridge, water pump, lights, phones, laptops, blenders, and speakers. The 3000VA inverter will also be able to run higher-wattage 230V mains appliances, such as hair dryers, induction hobs, or electric kettles.
The Ultimate Explorer is suitable for someone using their van for holidays and longer trips with a high power requirement. It would also be suitable for someone living in their van full-time if they have medium to high power requirements. The optional Lithium battery is suitable for most people whose usage fits this description. Check out our guidebook page on campervan leisure batteries to read more about choosing one that’s right for you.
If you would like any advice on whether this kit is suitable for you, please get in touch.
Looking for a different campervan electrical kit?
View all of our campervan electrical kits, from full system kits to subsystem kits ⚡
Products that give back
We are members of 1% for the Planet. This means that for every product purchased from Nohma, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Nohma. So, you can give back as well as powering your off-grid system.
Reviews
There are no reviews yet