Skip to content
  • Blue Victron 375VA Inverter 12V - Pure Sine Wave Phoenix Inverter VE.Direct with mounting holes, also known as the Victron 375W inverter. best camper van inverters
  • Back view of an electronic device with a blue frame, showing ports, switches, and various connectors, including those for the Victron 1200VA Inverter 12V - Pure Sine Wave Phoenix Inverter VE.Direct.
  • A blue Victron 1200VA Inverter 12V - Pure Sine Wave Phoenix Inverter VE.Direct is connected with wires and mounted on a wooden surface.

Victron 375VA Inverter 12V – Pure Sine Wave Phoenix Inverter VE.Direct

£149.50 £128.96 Save 14%

The 375VA Victron Energy Phoenix inverter converts the 12V DC power from your leisure batteries to 230V AC power so you can run up to 375VA of domestic appliances when off-grid.

  • Max constant power 375VA
  • Pure sine wave inverter
  • Appropriate for 12V systems
  • Quiet, efficient and reliable

Sorry, this product is not available to purchase in your country.

£1.29 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    Victron Energy Pure Sine Wave Phoenix Inverter 12/375 – PIN123750400

    The 375VA Victron Energy Phoenix inverter converts the 12V DC power from your leisure batteries into 230V AC power so you can run up to 375VA of domestic appliances continuously when off-grid. This makes the Victron inverter perfect for off-grid applications such as campervans and boats. The 375VA pure sine wave inverter will power products such as laptops, camera chargers and projectors, providing their combined wattage does not exceed 375VA for a prolonged period. The 375VA Phoenix inverter model has a UK 3 pin plug connected to the device to allow for easy installation.

    The Victron 375VA inverter does not have built-in Bluetooth or smart connectivity, however, you can pair this Phoenix inverter with the VE.Direct smart dongle to allow you to monitor your inverter’s performance and settings via the Victron Connect app. This will allow you to set a series of programmable alarms and cut-offs to warn you of low and high voltages, as well as being able to disconnect if your battery’s voltage drops below a defined value. You can download the Victron Connect App and access its trial product library to see how you can monitor, operate & configure each component of your system.

    Victron 375VA inverter – use case

    The Victron Phoenix inverter 375VA is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs and boats. It is suitable for anyone whose mains power appliances equal a total wattage of 375VA or less.

    Smart functionality with the addition of the VE.Direct smart dongle – monitor, operate & configure your system

    • Low battery voltage alarm trip and reset levels
    • Low battery voltage cut-off and restart levels
    • In and output voltage, % load and alarms
    • Dynamic cut-off: load dependent cut-off level
    • Output voltage 210 – 245V
    • Frequency 50 Hz or 60 Hz
    • ECO mode on/off and ECO mode sense level

    Pure sine wave inverter

    The Victron Energy Phoenix inverter is a pure sine wave inverter. Pure sine wave inverters convert the 12V DC power from your leisure batteries and exactly reproduce the 230V AC waveform you would get from a household mains socket. This means that they can power any 230V appliances. Certain 230V appliances can be damaged or not operate properly when run from a quasi (modified) sine wave inverter.

    Proven reliability

    Victron inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

    High start-up power

    Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

    ECO mode

    When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15VA). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on. This helps to reduce the power consumption of the inverter when not in use.

    Remote on/off

    A remote on/off switch can be connected to the Victron Phoenix inverter to allow you to turn off the inverter from a control panel rather than using the on/off switch on the unit itself.

    Looking for a different rated Victron Energy Phoenix inverter?

    View the full range of Victron Phoenix inverters 🔌

    Products that give back

    We are members of 1% for the Planet. This means that for every product purchased from Nohma, 1% of the total cost will be given to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Nohma will mean you can give back as well as powering your off-grid system.
    Product SKU: PIN121371400


    Weight 3 kg
    Dimensions 8.6 × 16.5 × 26 cm
    Brand

    Victron Energy

    Manufacturer Part Number

    PIN121371400

    Voltage

    12V

    VA

    375

    Peak Power (VA)

    700

    Max Efficiency

    89%

    Plug Type

    UK

    IP Rating

    IP21

    Sine wave type

    Pure sine wave

    Product or kit

    Product