Full campervan electrical kit – 1600VA EasyPlus‚ hook up‚ 320W solar‚ B2B & batteries

“Easy Explorer” – full campervan electrical kit with 1600VA EasyPlus, hookup, solar, B2B & batteries

The Easy Explorer is one of our full campervan electrical kits, including:

• 1600VA Victron EasyPlus combined inverter/charger w. integrated consumer unit
• 2x 160W monocrystalline solar panels & MPPT charge controller
• 30A Victron battery to battery charger
• 12V fuse board & BatteryProtect
• Lynx Distributor

Plus, pick from the following options:

• Leisure batteries (include 1x 230Ah Fogstar Drift PRO lithium battery or 3x 100Ah TN Power AGM batteries, or exclude and choose a different option from our range of batteries)
• Battery monitor (choose between the Victron SmartShunt or BMV)
• Cerbo GX system monitor & 5″ touch screen (optional)

Busbars, switches, cable, lugs, and everything else required to fully install this electrical system in your campervan are included in this kit.

Easy Explorer – full campervan electrical kit

Our full campervan electrical kits include everything you need to fully wire in a campervan electrical system. We include all cabling, fuses, cable lugs, etc., as well as a number of options to enhance the system.

This kit includes a 1600VA Victron EasyPlus inverter/charger/AC transfer switch and distributor, supplied with 3 core cable.

We supply 2x 160W monocrystalline solar panels with L mounting brackets. These are typically screwed into place, but can also be glued to both the panel and the roof of your vehicle if you don’t wish to drill through the roof of your vehicle. Note that that open circuit voltage (Voc) of these panels will double when they’re wired together in series, as instructed in the wiring diagram.

A 100/30 Victron MPPT charge controller is also included. If you choose to include a Cerbo, we’ll include the non-smart version, as you can set up and monitor through the Cerbo. Otherwise, we’ll include the SmartSolar version so you can configure through the Victron Connect app.

The 30A non-isolated battery to battery charger lets you recharge your leisure batteries as you drive. Please note – the non-isolated model requires a common chassis ground (most standard vehicles will have this).

For your 12V distribution and loads, we include a 12V fuse board. We also include a 65A Smart BatteryProtect in this full system kit. So, this protects your leisure battery when a low state of charge is reached by cutting off any 12V loads.

Choose to include a 1x 230Ah Fogstar Drift PRO lithium battery or 3x 100Ah TN Power AGM batteries. Alternatively, opt for the ‘no battery’ option and pick an alternative from our range of leisure batteries.

Distribute power from your leisure batteries to the rest of your system using a Lynx Distributor. We’ll also include an isolator switch so you can isolate power to the rest of the system. We also include a grounding busbar so all components can be grounded to this, and you can make a single grounding connection to the chassis.

Choose whether you want to include the Cerbo GX and 5″ touch screen. If included, this allows you to monitor your entire system from a single point, via your phone or laptop. We have water tank senders and RuuviTags available if you also want to monitor water tank level and temperature. Read our Cerbo GX article for more information.

This kit includes every single product you need to fully install your campervan electrical system. So as well as the major components, every cable, fuse, holder, switch and lug is included.

Wiring diagram & installation guidance

We supply all our kits with a subsystem wiring diagram and installation guidance. This includes information on setting up the inverter correctly using the DIP switches and the VictronConnect app. So, you can install your system easily and be confident it’s installed correctly. If you need any support during the install, contact us and we can provide additional support.

Easy Explorer – use case

This kit is suitable for someone who will spend their time mostly off-grid and who wants the easy installation of the Victron EasySolar combined inverter/charger/AC transfer switch and distributor. It includes a shore hook up, so you’ll be able to recharge from a campsite.

The 350W solar array is suitable for someone with medium to high power usage. For example, common appliances might include a 12V fridge, water pump, lights, phones, laptops, and speakers. The 1600VA inverter will also be able to run lower-wattage 230V mains appliances, such as blenders, hair dryers, or small induction hobs. You can choose the size of your battery bank to be more specific to your power usage and time spent off-grid.

If you would like any advice on whether this kit is suitable for you, please get in touch.

Looking for a different campervan electrical kit?

View all of our campervan electrical kits, from full system kits to subsystem kits ⚡

Products that give back

We are members of 1% for the Planet. This means that for every product purchased from Nohma, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Nohma. So, you can give back as well as powering your off-grid system.