Choose from products & kits or knowledge (guides and articles) ✌️
Climbingvan & Nomadic Energy is now Nohma
Same award-winning service,
fresh new name ⚡
Nohma logo
Skip to content
  • Victron Cyrix-i 12/24V 400A Intelligent Battery Combiner with terminals and wiring connections visible against a white background.

Victron Cyrix-i 12/24V 400A Intelligent Battery Combiner

£318.29 £268.31 Save 16%

The Victron Cyrix-ct 12/24V 400A battery combiner is a voltage sensitive relay which combines your leisure battery and starter battery when a pre-set voltage is reached.

  • Voltage sensitive relay
  • 400A charging current
  • Suitable for 12V and 24V systems
  • Suitable for use with lead acid (inc. AGM & gel) leisure batteries
  • Note: not suitable for use with vehicles with Euro 5 or Euro 6 engines

Sorry, this product is not available to purchase in your country.

SKU: CYR010400000 Category:

£2.68 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.


    New: intelligent battery monitoring to prevent unwanted switching

    Some battery combiners will disconnect a battery in case of a short but high amperage load. A battery combiner also may fail to connect a large but discharged battery bank because the DC voltage immediately drops below the disengage value once the batteries are connected. The software of the Cyrix-i does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix-i looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend.

    In addition, four switch timing profiles can be chosen.

    12/24 V and 24/48 V auto ranging

    The Cyrix-i automatically detects system voltage.

    No voltage loss

    Cyrix battery combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.

    Prioritizing the starter battery

    In a typical setup the alternator is directly connected to the starter battery. The accessory battery, and possibly also a bow thruster and other batteries are each connected to the starter battery with Cyrix battery combiners. When a Cyrix senses that the starter battery has reached the connect voltage it will engage, to allow for parallel charging of the other batteries.

    Bidirectional voltage sensing and power supply from both batteries

    The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.

    The Cyrix-i has a dual power supply. It will therefore also close if the voltage on one battery is too low to operate the Cyrix.

    In order to prevent unexpected operation during installation or when one battery has been disconnected, the Cyrix-i will not close if the voltage on one of the two battery connections is lower than 2 V (12 V battery), or 4 V (24 V battery) or 8 V (48 V battery).

    Parallel connection in case of emergency

    The Cyrix can also be engaged with a push button (Cyrix remains engaged during 30 s) or a switch to connect batteries in parallel manually.

    This is especially useful in case of emergency when the starter battery is discharged or damaged

    Product SKU: CYR010400000

    Weight 0.9 kg
    Dimensions 7.8 × 10.2 × 11 cm

    Victron Energy

    Manufacturer Part Number


    Peak Current

    2000A during 1 second

    Current Consumption When Open

    4 mA

    Micro Switch For Remote Monitoring


    LED Status Indication

    Bicolour LED

    Emergency Start

    Yes, 30s


    12V, 24V

    Current (A)



    5 Years

    Country of Manufacture


    Product or kit


    There are no reviews yet.

    Be the first to review “Victron Cyrix-i 12/24V 400A Intelligent Battery Combiner”

    Your email address will not be published. Required fields are marked *

    1 2 3 4 5