230W Solar Panel Kit – Includes Victron MPPT & 2x 115W Rigid Panels

230W Solar Panel Kit – Includes Victron MPPT, 2 x 115W Victron Rigid Solar Panels & all required components

This 12V 185W solar panel kit includes everything you need to wire a Victron 185W solar panel and 75/15 MPPT charge controller as part of your campervan electrical system. It includes:

• 2x 115W Victron solar panels
• 75/15 SmartSolar Victron charge controller
• PV isolator switch
• Scanstrut cable seal
• 20m Victron solar cable (to create 2x 10m cables from cable entry to charge controller)
• Required DC cable, cable lugs & fuses

Plus, pick from the following variables:

• Select whether to include solar panel L brackets and Soudaflex, or don’t include and choose your own mounting method

230W solar panel kit

Our solar panel kits include everything you need to connect a solar system to your electrical system. All cabling, fuses, cable lugs, etc. are included, as well as a number of optional extras to enhance the system.

This kit includes 2x Victron 115W solar panels. These are high performance, monocrystalline solar panels.

The 75/15 Smart Solar charge controller is suitable for the supplied solar panel. You can pick from the SmartSolar or the BlueSolar (non-smart) version.

The DC cable gauge is specced on the distance between the charge controller and your busbars being no longer than 1.5m each way (3m ‘there and back again’ length). If your charge controller will be further away than this, please contact us via the ‘get in touch’ section above so we can provide a system proposal with the correct cable gauge.

We include a PV isolator switch in every kit. This allows you to easily isolate the subsystem from the rest of your electrical system.

We include a Scanstrut horizontal double-entry cable seal with each kit. Scanstrut make rugged and weatherproof entry glands which provide a sealed and secure entry point into your van for the solar panel cables.

We use Victron solar cable to connect the solar panels to the charge controller. We include a 20m solar cable – simply cut in half to create 2x 10m cables with an MC4 connector at one end and wire at the other end. So, this is suitable for a distance of up to 10m between your solar panels and charge controller.

Select if you wish to include solar panel brackets, and we’ll include the correct quantity for the solar panels in the kit. If you select to include brackets, we’ll include a tube of Soudaflex to bond them to the roof of your vehicle.

Wiring diagram & installation guidance

📊 All our kits come with a detailed wiring diagram and installation guide. So, you can install your system easily and be confident it’s set up correctly.

🧑‍💻 Our dedicated technical support engineer is on hand to support you throughout the install. So, if you need any help, get in touch and we can guide you through the process.

Looking for a different solar panel kit?

View the full range of solar panel kits ☀️

230W solar array – use case

A 230W solar array is suitable for a small off-grid electrical system, such as in a campervan with low power usage. For example, a 230W solar array would fully recharge a 105Ah lithium battery from 20%-100% in ~7 hours on a sunny summer’s day.

Products that give back

For every product purchased from Nohma, we make a donation to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Nohma will mean you can give back as well as powering your off-grid system.