Victron Energy Pure Sine Wave Phoenix Inverter 48/2000 – PIN482201000
The 2000VA Victron Energy Phoenix inverter converts the 48V DC power from your leisure batteries into 230V AC power so you can run up to 2000VA of domestic appliances continuously when off-grid. This makes the Victron inverter perfect for off-grid applications such as campervans, boats and tiny houses. The 2000VA pure sine wave inverter will power products such as laptops, blenders and toasters, providing their combined wattage does not exceed 2000VA for a prolonged period. The 2000VA Phoenix inverter model has a UK 3 pin plug connected to the device to allow for easy installation.
The Victron 2000VA inverter has built-in Bluetooth and smart connectivity which allows you to monitor your inverter’s performance and settings via the Victron Connect app. The Phoenix inverter also includes a series of programmable alarms and cut-offs to warn you of low and high voltages, as well as being able to disconnect if your battery’s voltage drops below a defined value. You can download the Victron Connect App and access its trial product library to see how you can monitor, operate, and configure each component of your system.
Victron 2000VA inverter – use case
The Victron Phoenix inverter 2000VA is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs, boats and tiny off-grid houses. It is suitable for anyone whose mains power appliances equal a total wattage of 2000VA or less.
Smart functionality – monitor, operate, and configure your system
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- In and output voltage, % load and alarms
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 485V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
48V Inverter
The Victron 48V 2000VA inverter is a 48V pure sine wave inverter, to be used with 48V leisure batteries. If you are running a 48V electrical system, then the Victron 48V 2000VA inverter is suitable. This Victron Phoenix inverter will take in a 48V current and convert it to 230V to power your mains appliances.
Pure sine wave inverter
The Victron Energy Phoenix inverter is a pure sine wave inverter. Pure sine wave inverters convert the 48V DC power from your leisure batteries and exactly reproduce the 230V AC waveform you would get from a household mains socket. This means that they can power any 230V appliances. Certain 230V appliances can be damaged or not operate properly when run from a quasi (modified) sine wave inverter.
Proven reliability
Victron inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15VA). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on. This helps to reduce the power consumption of the inverter when not in use.
Remote on/off
A remote on/off switch can be connected to the Victron Phoenix inverter to allow you to turn off the inverter from a control panel rather than using the on/off switch on the unit itself.
Looking for a different rated Victron Energy Phoenix inverter?
View the full range of Victron Phoenix inverters, rated from 250VA-3000VA.
Products that give back
We are members of 1% for the Planet. This means that for every product purchased from Climbingvan, 1% of the total cost will be given to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Climbingvan will mean you can give back as well as powering your off-grid system.
Product SKU: PIN482201000
Reviews
There are no reviews yet