Skip to content
  • The Victron Argofet 200-2 - Two Batteries 200A by Victron Energy features three output connectors labeled 100A, 200A, and 100A, designed to efficiently manage power between two batteries.

Victron Argofet 200-2 – Two Batteries 200A

£147.98 £124.96 Save 16%

Similarly to diode battery isolators, the Argofet 200-2 allows simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss.

  • Charge 2 batteries
  • 200A charging current

Sorry, this product is not available to purchase in your country.

SKU: ARG200201020R Categories: ,

One percent of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

    In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

    When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

    Example: When a current of 100 A flows through a cable of 50 mm2 cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm2 cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

    Alternator energize input

    Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

    Product SKU: ARG200201020R


    Weight 1.4 kg
    Dimensions 6.5 × 12 × 20 cm
    Brand

    Victron Energy

    Manufacturer Part Number

    ARG200201020R

    Current (A)

    200

    Number Of Batteries

    2

    Connection

    M8 Bolts

    Warranty

    5 Years

    Country of Manufacture

    India

    Product or kit

    Product


    Reviews

    There are no reviews yet

    Be the first to review “Victron Argofet 200-2 – Two Batteries 200A”

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required