Skip to content
  • Victron Skylla-IP65 12V 70A 3 Outputs

Victron Skylla-IP65 12V 70A 3 Outputs

£1,085.24 £672.50 Save 38%

This Victron Skylla-IP65 is a powerful, waterproof and intelligent battery charger with a 7-stage adaptive charge algorithm, suitable for a wide range of battery types and chemistries featuring a dedicated Lithium-ion charge algorithm. It has three 70A full rated outputs and one 4A output. Charge voltage can be precisely adjusted to suit any battery system. It’s suitable for both lead acid and lithium battery banks.

  • 70A charging current
  • Suitable for 12V systems
  • 4 outputs (3c 70A + 4A)

Sorry, this product is not available to purchase in your country.

£6.73 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    A powerful, waterproof and intelligent battery charger with a 7-stage adaptive charge algorithm, suitable for a wide range of battery types and chemistries featuring a dedicated Lithium-ion charge algorithm.

    The wide range universal input voltage adds flexibility to the installation, the charger will maintain its full output power no matter where it is located in the world.

    The IP65 rating makes this charger especially suitable for marine, mobile, and industrial applications and it can withstand the rigors of an adverse environment: heat, humidity and salt air.

    Features

    Skylla-IP65 (3): three full current outputs to charge 3 battery banks

    The Skylla-IP65 (3) features 3 isolated outputs. All outputs can supply the full rated output current.

    IP65 protection

    Steel epoxy powder coated case. Withstands the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.

    LCD display

    For status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use.

    CAN-bus interface (NMEA2000)

    To connect to a CAN-bus network, to a Skylla-i Control panel or to the Color Control digital display.

    Synchronised parallel operation

    Several chargers can be connected in parallel and synchronised with help of the CAN-bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables.

    The right amount of charge for a lead-acid battery: variable absorption time

    When only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

    Preventing damage due to excessive gassing: the BatterySafe mode

    If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-IP65 will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.

    Less maintenance and aging when the battery is not in use: the Storage mode

    The Storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

    To increase battery life: temperature compensation

    Every Skylla-IP65 comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected.

    Battery voltage sense

    In order to compensate for voltage loss due to cable resistance, the Skylla-IP65 is provided with a voltage sense facility so that the battery always receives the correct charge voltage.

    Use as a power supply

    As a result of the excellent control circuit, the Skylla-IP65 can be used as a power supply with perfectly stabilized output voltage if batteries or large buffer capacitors are not available.

    Li-Ion (LiFePO4) ready

    Simple charger on-off control can be implemented by connecting a relay or open collector opto coupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the CAN-bus port.

    Product SKU: SKY012070100


    Weight 6 kg
    Dimensions 40.1 × 26.5 × 15.1 cm
    Brand

    Victron Energy

    Manufacturer Part Number

    SKY012070100

    Voltage

    12V

    Current (A)

    70

    Input Voltage

    120/230V

    Number of Outputs

    3

    Protection Category

    IP65

    Bluetooth Enabled

    No

    Warranty

    5 Years

    Country of Manufacture

    Malaysia

    Product or kit

    Product


    Reviews

    There are no reviews yet

    Be the first to review “Victron Skylla-IP65 12V 70A 3 Outputs”

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required