Choose from products & kits or knowledge (guides and articles) ✌️
Climbingvan & Nomadic Energy is now Nohma
Same award-winning service,
fresh new name ⚡
Nohma logo
Skip to content

Victron SmartSolar MPPT RS 450/200-Tr – Charge Controller

£2,797.66 £1,933.00 Save 31%

The Victron MPPT RS 450/200 SmartSolar charge controller harvests the power generated from your solar panels and intelligently charges your leisure batteries. All Victron MPPT charge controllers perform this function efficiently whilst protecting your leisure batteries from overcharging. The SmartSolar functionality allows you to connect directly to the Victron Connect app via Bluetooth to adjust settings and monitor performance over time.

  • For 48V systems
  • 450V maximum voltage from the solar array
  • 200A maximum current from the solar array
  • MPPT optimised for efficient solar charging
  • Settings and performance can be monitored through the VictronConnect app
  • Tr screw terminal connection points

Sorry, this product is not available to purchase in your country.

SKU: SCC145120410 Category:

£19.33 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    The SmartSolar MPPT RS 450/200-Tr solar charge controllers are Victron’s solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems.

    Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products.

    Features of the SmartSolar MPPT RS 450/200-Tr

    MPPT: Ultra Fast Maximum Power Point Tracking

    The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

    The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more.

    Setup and monitor with VictronConnect

    The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

    Daisy Chain Additional Units

    The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy chained” to each other with an RJ45 cable.

    When connected to each other, all individual charge controllers, will synchronise their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

    Remote Monitoring and Control

    If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

    If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

    For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

    SmartSolar Display

    The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

    I/O Connections

    The SmartSolar MPPT RS 450/200-Tr is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

    Not sure what size charge controller you need? Why not check out the MPPT sizing calculator.
    Product SKU: SCC145120410

    Weight 13.7 kg
    Dimensions 48.7 × 43.4 × 14.6 cm

    Victron Energy

    Manufacturer Part Number




    Rated Charge Current


    Max. PV Short Circuit Current

    20 A per tracker

    Protection Category




    Bluetooth Enabled


    Charge controller rating



    5 Years

    Country of Manufacture


    Product or kit


    Charge controller type


    There are no reviews yet.

    Be the first to review “Victron SmartSolar MPPT RS 450/200-Tr – Charge Controller”

    Your email address will not be published. Required fields are marked *

    1 2 3 4 5