Skip to content
  • Water tank level sensor - resistive tank level sender, with a long rod and attached black wire, suitable for fuel tank or water tank level measurement.
  • A close-up view of a metallic cylindrical temperature sensor, often used alongside a Water tank level sensor - resistive tank level sender, with three exposed wires: blue, red, and brown.
  • A hand holding a base plate with a connected black cable next to a cylindrical metal rod, part of the Water tank level sensor - resistive tank level sender.
  • A black circular gasket with four holes and five silver screws placed next to it, designed for optimal use with a Water tank level sensor - resistive tank level sender.
  • A Water tank level sensor - resistive tank level sender with wires and a red plastic component lies on a light wood floor near a blue container.
  • Close-up of a disassembled plumbing tool with a red handle lying on a wooden surface, next to a water tank level sensor - resistive tank level sender.
  • Close-up of a Water tank level sensor - resistive tank level sender with a black cable and a rubber gasket on a wooden surface, with a red tool in the background.

Water tank level sensor – resistive tank level sender

From £30.00

Use this resistive water tank level sensor to monitor the exact water level in your campervan or boat water tank. Pair the resistive tank sender with a Cerbo GX to accurately monitor your water level.

  • Resistive tank sender (240-33 Ohm or 1-190 Ohm depending on length)
  • Available in a range of lengths: 600mm, 450mm, 400mm, 350mm, 300mm, 250mm, 200mm, 150mm and 100mm
  • Made from stainless steel and plastic
  • Pair with a Cerbo to monitor the exact water level in your tank

Sorry, this product is not available to purchase in your country.

SKU: WATER-SENSOR Categories: , ,

From £30.00

£0.30 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    Water tank level sensor – resistive tank level sender

    Use this resistive water tank level sensor to monitor the exact water level in your campervan or boat water tank. Pair the resistive 240-33 Ohm or 1-190 Ohm tank sender with a Cerbo GX to accurately monitor your water level. The sensor utilises a plastic bob which floats in the water to give you an accurate measurement of liquid left in any tank. You can view our very own campervans water tank level through our Cerbo and the VRM portal here.

    Campervan and boat water level monitoring

    Pair the water tank level sensor with a Cerbo GX to monitor the level in any tank. It can be used to monitor water level in fresh water tanks, grey water tanks or even diesel tanks.

    Tank level sensor features

    • Resistive tank sender (240-33 Ohm or 1-190 Ohm depending on length)
    • Available in a range of lengths: 600mm, 450mm, 400mm, 350mm, 300mm, 250mm, 200mm and 150mm
    • Made from stainless steel and plastic

    Installation

    The tank sender should be mounted on the top of your tank. Drill a hole in the top of the tank using a 40mm hole saw and insert the tank sender. The sender is supplied with a rubber gasket to ensure a tight seal is formed on the tank.

    Ensure you purchase a sensor just shorter than the height of your tank. The bottom of the sender should almost touch the bottom of the tank.

    To find out how to use this water tank sensor with your Cerbo GX, read our Cerbo installation guide.

    Products that give back

    We are members of 1% for the Planet. This means that for every product purchased from Nohma, 1% of the total cost will be given to The Honnold Foundation, to provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchasing your components from us at Nohma will mean you can give back as well as powering your off-grid system.

    Looking for other system monitoring devices?

    Browse our full range of system monitoring products, to allow you to monitor temperature, humidity and more.


    Operating temperature

    -40 ºC to +85 ºC

    Material

    Stainless steel & plastic

    Screw size

    M5 x 0.8

    Output signal

    1-190 Ohms (150-400mm), 240-33 Ohms (450mm-600mm)

    Length

    100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 600mm

    Product or kit

    Product


    Reviews

    There are no reviews yet

    Be the first to review “Water tank level sensor – resistive tank level sender”

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required