Skip to content
  • 1600va multiplus kit full campervan electrics
  • Nomadic energy electrical system design
  • Victron MultiPlus 1600W 12V Inverter/Charger - Victron Energy MultiPlus 12/1600/70 230V Inverter/Charger - PMP122160000
  • consumer unit used in electric hook up kits

1600VA MultiPlus Kit – Includes Victron MultiPlus 12V inverter/charger

(1 customer review)

From £958.06

This MultiPlus kit includes everything you’ll need to wire in the 12V Victron MultiPlus 1600VA inverter/charger as part of your campervan electrical system. It includes:

  • Victron MultiPlus 1600VA 12V inverter/charger
  • 2x consumer units
  • 20m x 3 core cable
  • Required DC cable, cable lugs & fuses (select whether using busbars or Lynx Distributor so we can include correct fuses & holders)
  • Switch (optional – select if required)
  • Shore inlet (polyamide or steel)
  • Shore hookup cable (optional – select if required)

Sorry, this product is not available to purchase in your country.

From £958.06

One percent of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Got a question or want to modify a kit?

Our team of engineers can tailor any kit to your needs, by email or phone 👌
Book a call

    1600VA MultiPlus Kit – Includes Victron 1600VA 12V MultiPlus inverter/charger & all required components

    This MultiPlus kit includes everything you need to wire the 12V Victron MultiPlus 1600VA inverter/charger as part of your campervan electrical system. It includes:

    Plus, pick from the following variables:

    • Blue Sea 300A switch (optional – if you would like to be able to isolate the MultiPlus from your system)
    • Shore inlet (select from Victron polyamide or Victron steel options – both rated to 16A)
    • Shore hookup cable (optional – select if required, 15m and 25m options available. Please note that the Victron shore inlet is only compatible with Victron branded hookup cables)
    • Select whether you will connect to busbars or a Lynx Distributor (so we can include the correct fuses & holders)

    Victron 1600VA MultiPlus kit

    Our Victron MultiPlus kits include everything you need to connect an inverter/charger subsystem to your electrical system. All cabling, fuses, cable lugs, etc. are included, as well as a number of optional extras to enhance the system.

    We supply consumer units which contain 1x 25A RCD, 1x 10A MCB and 1x 6A MCB.

    The DC cable gauge is specced on the distance between the MultiPlus and your busbars being no longer than 1.5m each way (3m ‘there and back again’ length). If your inverter/charger will be further away than this, please contact us via the ‘modify this kit’ section above so we can provide a system proposal with the correct cable gauge.

    We supply 20m of 3 core cable. This is used to connect the shore inlet, consumer units and MultiPlus, as well as wire any 230V sockets and appliances. If you require more cable than this you can add additional 3 core cable to your order separately.

    You have the option to add a Blue Sea 300A switch. This allows you to easily isolate the subsystem from the rest of your electrical system.

    If you have a Cerbo GX in your electrical system, you will just need to add a single RJ45 cable to connect this to the MultiPlus.

    Select whether you will use busbars or a Lynx Distributor to connect your subsystems to your batteries. Please note that the busbars / Lynx Distributor are not included in this kit, however by selecting what you are using in your system, we can ensure we include the required fuses and fuse holders.

    Choose from the Victron polyamide or Victron steel shore power inlet. Both are rated to 16A.

    Select if you would like to include a Victron shore hookup cable. It’s not possible to use an unbranded hookup cable with the Victron inlets, so if you don’t already have one you should include this.

    Wiring diagram & installation guidance

    All of our kits are supplied with a subsystem wiring diagram and installation guidance. This includes information on setting up the MultiPlus correctly using the DIP switches. So, you can install your system easily and be confident it’s installed correctly. If you need any support during the install, contact us and we can provide additional support.

    Looking for a different Victron MultiPlus kit?

    View the full range of Victron MultiPlus kits 🔌

    Victron 1600VA MultiPlus inverter/charger – use case

    The Victron MultiPlus 1600VA inverter/charger is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs and boats. It is suitable for anyone whose mains power appliances equal a total wattage of 1600VA or less. As the Victron MultiPlus is an inverter/charger, it will also allow the system to be charged via shore power when connected to hookup.

    Products that give back

    We are members of 1% for the Planet. This means that for every product purchased from Nohma, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Nohma. So, you can give back as well as powering your off-grid system.


    Brand

    Victron Energy

    Voltage

    12V

    Inverter rating (VA / W)

    1600

    Peak Power (VA)

    2800

    Current (A)

    70

    Max Efficiency

    93%

    IP Rating

    IP21

    Dimensions

    H470 x W265 x D120mm

    Weight (kg)

    10.2

    Warranty

    5 years

    Product or kit

    Kit


    1 review for 1600VA MultiPlus Kit – Includes Victron MultiPlus 12V inverter/charger

    1. Craig S. (verified owner)

      Great kit, had everything I needed. To note the bluetooth dongle cannot change any settings, you need a different interface part for that.

    Add a review

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required