3000VA MultiPlus-II Kit – Includes Victron MultiPlus-II 12V inverter/charger

3000VA MultiPlus-II Kit – Includes Victron 3000VA 12V MultiPlus inverter/charger & all required components

This MultiPlus kit includes everything you need to wire the 12V Victron MultiPlus-II 3000VA inverter/charger as part of your campervan electrical system. It includes:

• Victron MultiPlus-II 3000VA 12V inverter/charger
• 2x consumer units
• Required DC cable & cable lugs
• 20m x 3 core cable
• MK3 to USB-C interface & RJ45 cable (required to configure the settings of your MultiPlus)

Plus, pick from the following variables:

• Shore inlet & 25m hook up cable included, or select 'none' to include your own

Victron 3000VA MultiPlus-II kit

Our Victron MultiPlus kits include everything you need to connect an inverter/charger subsystem to your electrical system. All cabling, fuses, cable lugs, etc. are included, as well as a number of optional extras to enhance the system.

We supply consumer units which contain 1x 25A RCD, 1x 10A MCB and 1x 6A MCB. We include two additional 16A MCBs so you can harness the full power of your MultiPlus.

The DC cable gauge is specced on the distance between the MultiPlus and your busbars being no longer than 1.5m each way (3m 'there and back again' length). If your inverter/charger will be further away than this, please contact us via the 'modify this kit' section above so we can provide a system proposal with the correct cable gauge.

We supply 20m of 3 core cable. This is used to connect the shore inlet, consumer units and MultiPlus, as well as wire any 230V sockets and appliances. If you require more cable than this you can add additional 3 core cable to your order separately.

We include an MK3 to USB-C interface and RJ45 cable, so you can configure the settings for the MultiPlus from your computer.

If you select to include a shore power inlet and hook up cable, we'll include a black square inlet (rated to 16A) and 25m cable. Or, select 'none' and choose your own.

If you'd like to monitor your MultiPlus from a Cerbo GX, you'll need to purchase an additional RJ45 cable.

Please note: This is a kit for a 12V electrical system.

Wiring diagram & installation guidance

📊 All our kits come with a detailed wiring diagram and installation guide. So, you can install your system easily and be confident it’s set up correctly.

🧑‍💻 Our dedicated technical support engineer is on hand to support you throughout the install. So, if you need any help, contact us and we can guide you through the process.

Looking for a different Victron MultiPlus kit?

View the full range of Victron MultiPlus kits 🔌

Victron 3000VA MultiPlus-II inverter/charger – use case

The Victron MultiPlus-II 3000VA inverter/charger is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs and boats. It is suitable for anyone whose mains power appliances equal a total wattage of 3000VA or less. As the Victron MultiPlus is an inverter/charger, it will also allow the system to be charged via shore power when connected to hookup.

Products that give back

We are members of 1% for the Planet. This means that for every product purchased from Nohma, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Nohma. So, you can give back as well as powering your off-grid system.