Skip to content
  • Campervan solar panel kit and MPPT charge controller set, complete with cables, connectors, fuse, and other accessories on a white background.
  • Nomadic energy electrical system design
  • victron-energy-solar-panel-360W-24v-monocrystalline- Victron solar panels
  • Victron MPPT 100/20 Charge Controller - 100/20 SmartSolar - Victron Energy Smart Solar charge controller MPPT 100/20 - SCC110020160R
  • 305W Solar Panel Kit – 1x 305W dimensions

305W Solar Panel Kit – Includes Victron MPPT & 305W Rigid Panel

From £416.83

This 305W solar panel kit includes everything you need to wire a 305W solar array and a 100/20 MPPT charge controller as part of your 12V campervan electrical system. It includes:

  • 305W Victron solar panel (165.8 × 100.2 × 3.5 cm)
  • 100/20 MPPT charge controller (choose smart or non-smart)
  • Solar cable to connect solar panels to charge controller (choose the distance between your solar panels & charge controller)
  • Solar panel brackets (choose screwed or glued)
  • Required DC cable, cable lugs & fuses
  • Isolator switch
  • Double-entry cable seal

Sorry, this product is not available to purchase in your country.

From £416.83

One percent of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    305W Solar Panel Kit – Includes Victron MPPT, 305W Victron Solar Panel & all required components

    This 12V 305W solar panel kit includes everything you need to wire a 305W solar array and a 100/20 MPPT charge controller as part of your campervan electrical system. It includes:

    Plus, pick from the following variables:

    305W solar panel kit

    Our solar panel kits include everything you need to connect a solar array to your electrical system. All cabling, fuses, cable lugs, etc. are included, as well as a number of optional extras to enhance the system.

    This kit includes a 305W solar panel. This is a monocrystalline solar panel with a Voc of 39.7V and an Isc of 10.27A. This higher Voc will make charging on cloudy days or during winter much more viable. Find out more on our solar panel guidebook page.

    The 100/20 charge controller is suitable for the supplied solar panels. You can pick from the SmartSolar or the BlueSolar (non-smart) version.

    The DC cable gauge is specced on the distance between the charge controller and your busbars being no longer than 1.5m each way (3m ‘there and back again’ length). If your charge controller will be further away than this, please contact us via the ‘modify this kit’ section above so we can provide a system proposal with the correct cable gauge.

    We include a PV isolator switch in every kit. This allows you to easily isolate the subsystem from the rest of your electrical system.

    We include a Scanstrut horizontal double-entry cable seal with each kit. Scanstrut make rugged and weatherproof entry glands which provide a sealed and secure entry point into your van for the solar panel cables.

    We use Victron solar cable to connect the solar panels to the charge controller. Select the distance between your solar panels and charge controller, and we will supply a cable twice as long. This is then cut in half to create 2x cables with an MC4 connector at one end and wire at the other end.

    Select from either glued or screwed solar panel brackets, and we’ll include the correct quantity for the solar panels in the kit. If you select screwed brackets, we’ll include well nuts to form a watertight connection. The well nut included is an M5 well nut, provided with a rubber washer and a BZP 25mm allan bolt.

    Wiring diagram & installation guidance

    All of our kits are supplied with a subsystem wiring diagram and installation guidance. This includes information on setting up the charge controller correctly using the rotary switch and the VictronConnect app (if a SmartSolar charge controller is selected). So, you can install your system easily and be confident it’s installed correctly. If you need any support during the installation, contact us and we can provide additional support.

    Looking for a different solar panel kit?

    View the full range of solar panel kits ☀️

    305W solar array – use case

    A 300W solar array is suitable for a small off-grid electrical system, such as in a campervan with low power usage. For example, a 305W solar array would fully recharge a 200Ah AGM battery bank (2 x 100Ah batteries) from 20%-100% in ~10 hours on a sunny summer’s day.

    Products that give back

    We are members of 1% for the Planet. This means that for every product purchased from Nohma, we will give 1% of the total cost to The Honnold Foundation, who provide solar power to underprivileged communities. If you want your electrical system to have more of a positive impact, purchase your components from Nohma. So, you can give back as well as powering your off-grid system.


    Weight 18.4 kg
    Dimensions 165.8 × 100.2 × 3.5 cm
    Voltage

    12V

    Brand

    Victron Energy

    Solar array size (W)

    305

    Cell type

    Monocrystalline

    Solar panel type

    Rigid

    Solar panel colour

    Traditional

    Junction box position

    Rear

    Open Circuit Voltage (Voc)

    39.7V

    Short circuit current (Isc)

    10.27A

    Maximum power voltage (Vmpp)

    32.5V

    Maximum power current (Impp)

    9.38A

    Warranty

    5 years

    Product or kit

    Kit


    Reviews

    There are no reviews yet

    Be the first to review “305W Solar Panel Kit – Includes Victron MPPT & 305W Rigid Panel”

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required