Choose from products & kits or knowledge (guides and articles) ✌️
LOADING
Climbingvan & Nomadic Energy is now Nohma
Same award-winning service,
fresh new name ⚡
Nohma logo
Skip to content

Victron Battery Protect 100A – 12/24V

£72.82 £53.09 Save 27%

The Victron BatteryProtect is designed to protect a leisure battery in an electrical system. It disconnects the battery from non-essential loads before it is completely discharged, which would damage the battery. The BatteryProtect is not designed for reverse currents from charging sources.

  • Suitable for loads up to 100A
  • Suitable for 12V and 24V systems
  • Non-smart model

Sorry, this product is not available to purchase in your country.

SKU: BPR000100400 Category:

£0.53 of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    The BatteryProtect is not designed for reverse currents from charging sources.

    Features

    12/24V auto ranging

    The BatteryProtect automatically detects system voltage.

    Programming made easy

    The BatteryProtect can be set to engage / disengage at several different voltages.

    The seven segment display will indicate which setting has been chosen.

    A special setting for Li-ion batteries

    In this mode the BatteryProtect can be controlled by the VE.Bus BMS.

    Ultra low current consumption

    This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

    Over voltage protection

    To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

    Ignition proof

    No relays but MOSFET switches, and therefore no sparks.

    Delayed alarm output

    The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

    Delayed load disconnect and delayed reconnect

    The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.

    The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

    Product SKU: BPR000100400


    Weight 0.5 kg
    Dimensions 5.9 × 4.2 × 11.5 cm
    Brand

    Victron Energy

    Manufacturer Part Number

    BPR000100400

    Voltage

    12V, 24V

    Current (A)

    100

    Peak Current (During 30 Seconds)

    600A

    Operating Voltage Range

    6 –35V

    Alarm Output Delay

    12 seconds

    Max. Load on Alarm Output

    50 mA

    Load Disconnect Delay

    90 seconds

    Load Reconnect Delay

    30 seconds

    Protection Category

    Electronics: IP67 (potted), Connections: IP00

    Connection

    M8

    Mounting Torque

    9 Nm

    Bluetooth Enabled

    No

    Smart functionality

    Non-smart

    Warranty

    5 Years

    Product or kit

    Product



    There are no reviews yet.

    Be the first to review “Victron Battery Protect 100A – 12/24V”

    Your email address will not be published. Required fields are marked *

    1 2 3 4 5