Skip to content
  • Victron Energy Phoenix Charger 24V 25A 2+1 Outputs with LED indicators, labeled front panel, and 24V 25A capabilities.
  • Blue Victron Energy Phoenix Charger 24V 25A 2+1 Outputs with status indicator lights and a bird logo on the front.
  • The blue Victron Energy Phoenix Charger 24V 25A 2+1 Outputs with indicator lights and branding.

Victron Energy Phoenix Charger 24V 25A 2+1 Outputs

£806.88 £500.70 Save 38%

The Victron Phoenix Charger 24V 25A is a 4 stage charger: bulk, absorption, float and storage. It has 2 full rated outputs of 25A and one 4A output to trickle charge the starter battery.

  • 25A charging current
  • Suitable for 24V systems
  • 4A output to trickle charge starter battery

Sorry, this product is not available to purchase in your country.

One percent of this purchase goes to planting trees and advancing access to solar energy 🌱
Find out more

Campervan electrics leaving you confused?

Our team of engineers will design your perfect system, bespoke to your needs 👌
Discover more It's free

    Adaptive 4-stage charge characteristic: bulk – absorption – float – storage. Two full rated outputs and one 4 Amp output. Universal input 90-265V, 50/60Hz. The Phoenix charger features a microprocessor controlled adaptive battery management system that can be pre-set to suit different types of batteries. The adaptive feature will automatically optimise the charge process relative to the way the battery is being used.

    Features

    Adaptive 4-stage charge characteristic: bulk – absorption – float – storage

    The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.

    The right amount of charge: variable absorption time

    When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

    Preventing damage due to excessive gassing: the BatterySafe mode

    If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached (see the charge curve between 14,4 V and 15,0 V in fig. 2 below).

    Less maintenance and aging when the battery is not in use: the Storage mode

    The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

    To increase battery life: temperature compensation

    Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.

    Battery voltage sense

    In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.

    Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)

    The chargers will accept a 90-400 V DC supply
    Product SKU: PCH024025001


    Weight 3.8 kg
    Dimensions 35 × 20 × 10.8 cm
    Brand

    Victron Energy

    Manufacturer Part Number

    PCH024025001

    Voltage

    24V

    Charge Current

    25A

    Input Voltage

    90-265V

    Number of Outputs

    2+1

    Protection Category

    IP21

    Bluetooth Enabled

    No

    Current (A)

    25

    Warranty

    5 Years

    Country of Manufacture

    Malaysia

    Product or kit

    Product


    Reviews

    There are no reviews yet

    Be the first to review “Victron Energy Phoenix Charger 24V 25A 2+1 Outputs”

    Your email address will not be published. Required fields are marked *

    Overall rating*
    0/5
    * Rating is required
    Rating:*
    0/5
    * Rating is required